Attention!
Before using for the first time, fully charge the mini camera battery!
This mini video camera has a built-in lithium-ion battery. You can perform charging in one of the
following ways:
1. Connect the mini video camera to the USB port of your PC, stop
recording first.
2. Connect the mini camera to a charger from a 220V network or a portable 5V charger. In this case, you can continue to use the minicamera in the charging process. In the charging process, the blue and red LEDs will light constantly.
After the mini camera battery is fully charged, the blue LED will light
constantly and the red LED will turn off.
• If the built-in battery is empty or there is not enough space on the memory card to continue, the blue and red LEDs on the mini
camcorder will blink for 5 seconds simultaneously, after which the mini camcorder will save the recorded video and automatically turn
off.
• If the memory card is not installed, the blue and red LEDs of the Mini Recorder will blink simultaneously for 5 seconds, after which the Mini Camera will automatically turn off.
• If the camcorder is in the standby mode and does not take any action on it, the camcorder automatically turns off after 1 minute to save the charge of the built-in battery.
Video Recording
• Shooting video with a resolution of 1280X720P
Press the «On / Off» button to turn on the mini camera – the blue LED will light up – the mini camcorder is in the video recording standby
mode with 720p quality.
Press the «On / Off» button once to start recording video – the blue LED will blink 3 times and go out – 720p video is recorded. The video will be automatically saved every 5 minutes. To stop recording, press the «On / Off» button.
• Shooting video with a resolution of 1920X1080P
Press the «On / Off» button to turn on the mini camera – the blue LED will light constantly.
Press the «Mode» button once to enter the video capture mode with 1080p resolution – the red and blue LEDs will light simultaneously, the mini camera is in the video recording standby mode with 1080p quality.
To start recording, press the «On / Off» button once – the blue LED will go out, and the red LED will blink 3 times and go out – the video is recorded with a quality of 1080p.
The video will be automatically saved every 5 minutes. To stop recording, press the «On / Off» button.
Motion Sensor Video Recording
To do this, while in the 720p or 1080p video recording standby mode, press and hold the «Mode» button of the mini video camera for 3
seconds – the camcorder enters the motion sensor recording mode. If motion is detected, the video recording will start automatically, with
red and blue LEDs blinking at the same time. When recording motion sensor, the video recording is automatically saved every 5 minutes.
• Photo
Press the «On / Off» button to turn on the camera – the blue LED will light up. Press the «Mode» button twice to enter the photographing
mode – the red LED will stay lit. To take a picture, press the «On / Off» button once – the red LED blinks once, the photo is saved. The resolution of the received photos is 4032×3024.
• Night Light
Press the «On / Off» button to turn it on. Press and hold the «On / Off» button for 2 seconds – the red LED will blink twice – the night
illumination is on. To turn off the night illumination, press and hold the«On / Off» button for 2 seconds, the red LED will blink three times –
the night illumination is turned off.
• Shutdown
To turn off the camcorder, press and hold the «On / Off» button for 6 seconds. If the Mini Camcorder is in the standby mode and is not in
use, it automatically turns off after 1 minute.
• Viewing Files
Connect the camcorder in the off state to the computer – after a few seconds it will automatically be detected as a removable disk. The
blue indicator will indicate the transfer of information, and the red indicator will indicate the charging of the built-in battery.
• Setting the Date and Time
Connect the mini video camera to the computer. Setting the time is done by creating a text file named «TIMERSET.txt» in the root
directory of the device’s memory card, with the following content:«YYYYMMDDHHMMSS» «Y» (or «N», if you do not want the date
and time stamp displayed on video files)
For example, «20170625140003 Y» After saving the file, disconnect the video camera from the computer and turn it on.
Contact Us
+254 740695968
info@sophie.co.ke
https://sophie.co.ke
Hi. Bought this camera 2 months ago but have not been able to use it. Have read the instructions time and again without success..
I wonder if anyone has succeed using it.
Gibson
Hi, Gibson, can you kindly share your order number please?