Features:
Smooth movement of sand relieves stress, relaxes your eyes and increases patience.
Each flip can produce a completely non-repetitive dynamic painting.
It is conducive to the development of intelligence and improve mood.
The glass frame is crystal clear and luxurious.
The inner frame of the plastic has a strong concave and convex feel.
Suitable for living room and bedroom decoration.
Acrylic base: Acrylic material is delicate and thick and can be placed anywhere, such as hotels, restaurants, bars, dance halls, bedrooms, offices and study rooms.
The combined flow of liquid allows each turn to flow smoothly.
It is picked up on the table, rotated, and placed horizontally like a photo frame.
Watch the mountains, valleys and dunes that form in front of your eyes!
specification:
Material: glass, acrylic, quicksand
Note:
If there are few air bubbles, please let the quicksand stand still to the bottom, the air bubbles are on the top, and then shake, it will generate more small air bubbles, and it will flow more slowly.
If you want the quicksand to be slower, you can use a syringe to inject air into it, so that it has more bubbles, so that the quicksand will flow more slowly.
Package Included:
1 x quicksand painting
Prodcut instructions
Specific operation:
Quicksand art is the natural balance between water ,sand and air .The air is suitable at height of about 5mm,and the sand will reach a relatively good flow rate.
with the change of themperature and aire pressure,sometimes you need to adjust the air and water in the quicksand painting
Quicksand falls too fast:
add som air or water
1.with the above method ,concentrate the aire to any corner with air holes and make sure that the sand moves away.
2.Insert air or water with by syringe
Quicksand falls too slowly:
draw out some air or water
1.Each round quicksand arit painting has a hole,which concentrates the air into the corner of any air hole and waits for the sand to move away.then draw out some air or water.
If many small bubbles in quicksand painting become a particularly large bubble,this time can be filled with some water to supplement the evaporation of water.
1.Be sure to use pure water or boiled water for cooling.
2.Select a vent ,wait for the sand to be removed,draw out some air,and empty the air regulator tube.
3.Then use the air regulator to pump in and fill in too much water to prevent the pressure from being to high and the glass from breaking.
Related Products
Out of stock
Out of stock
